Analogue Telephone Card TDM2401B

£472.94 inc. VAT

Your purchase is worth: 20 VoIP points

Card Configuration

Connector Cable

Telephone Breakout Box

Overview

Features

Reviews

Support and downloads

Please wait while loading content...

The Wildcard TDM2400P is a full-length PCI 2.2-compliant card that supports FXS and FXO station interfaces for connecting analog telephones and analog POTS lines through a PC. Using Digium's Asterisk Open Source PBX software and standard PC hardware, one can create a SOHO (Small Office Home Office) telephony environment that includes all the sophisticated features of a high-end business telephone system.

The TDM2400P takes the place of an expensive channel bank and brings the system price point to a low level. By using X400M and S400M modules with the TDM2400P, one can create a solution with support for a range of telephones. To scale this solution, simply add additional TDM2400P cards populated with modules. Each module has the capacity for 4 channels allowing for a total of 24 maximum channels on a single PCI slot.

Select the card configuration you require for your Asterisk PBX from the dropdowns under BUY tab. Please use the table as a guide.

What are FXS and FXO?
Note: The 12V power connector is required for the operation of FXS modules. It is not required for the operation of FXO modules.

The naming convention for the TDM2400 bundles is as follows: TDM24 X Y B / E.

"TDM24" denotes that the card is TDM2400P
"X" denotes the number of FXS modules
"Y" denotes the number of FXO modules
"B" indicates that this product is a bundle without Echo Cancellation.
"E" indicates that this product is a bundle with Echo Cancellation.

Please note: On the TDM2400P, one module is equal to 4 ports. The "X" and "Y" denote modules, NOT ports.

	0 FX0 Modules	1 FX0 Module	2 FX0 Modules	3 FX0 Modules	4 FX0 Modules	5 FX0 Modules	6 FX0 Modules
0 FXS Modules	TDM2400B TDM2400E	TDM2401B TDM2401E	TDM2402B TDM2402E	TDM2403B TDM2403E	TDM2404B TDM2404E	TDM2405B TDM2405E	TDM2406B TDM2406E
1 FXS Module	TDM2410B TDM2410E	TDM2411B TDM2411E	TDM2412B TDM2412E	TDM2413B TDM2413E	TDM2414B TDM2414E	TDM2415B TDM2415E
2 FXS Modules	TDM2420B TDM2420E	TDM2421B TDM2421E	TDM2422B TDM2422E	TDM2423B TDM2423E	TDM2424B TDM2424E
3 FXS Modules	TDM2430B TDM2430E	TDM2431B TDM2431E	TDM2432B TDM2432E	TDM2433B TDM2433E
4 FXS Modules	TDM2440B TDM2440E	TDM2441B TDM2441E	TDM2442B TDM2442E
5 FXS Modules	TDM2450B TDM2450E	TDM2451B TDM2451E
6 FXS Modules	TDM2460B TDM2460E

Unlike previous Digium boards which had RJ-11 or RJ-45 jacks on the back of the card, this card features a 25 pair (50 pin) "Amphenol" connector and requires a Breakout Box and 25-pair Connector Cable.