    
Grandstream Handytone ATA-286
Product code: GSATA286
£29.00
£34.08 inc. VAT
UK and European Power
Supplies Available
Grandstream HandyTone ATA-286 is an award-winning next generation VoIP
analog telephone adaptor based on industry open standards. Bult upon innovative
technology, Grandstream HandyTone ATA-286 features market leading superb
sound quality, compact size and rich functionalities at a highly-affordable
price.

Not sure which Handytone? Check our Grandstream Handytone comparison table.
- SIP 2.0, TCP/UDP/IP, RTP/RTCP, HTTP, ARP/RARP, ICMP, DNS, DHCP, NTP,
TFTP protocols
- NAT traversal using IETF STUN and symmetric RTP (compatible with Cisco's
ATA-186)
- Advanced Digital Signal Processing (DSP) to ensure superb hi-fidelity
audio quality
- One LAN port and one FXS interface for connection of analog / cordless telephones, and fax machines
- Transparent Fax pass-through
- Interoperable with various 3rd party SIP and user devices, Proxy/Registrar/Server,
and gateway products
- Advanced and patent pending adaptive jitter buffer control, packet
delay and loss concealment technology
- Popular codecs including G.723.1 (5.3k/6.3k), G.729A/B, G.711 (a-law
and u-law), G.726 and G.728. Dynamic negotiation of codec and voice
payload length
- Standard voice features such as Caller ID Display or Block, FLASH,
in-band and out-of-band DTMF (RFC2833), Dial Plans, off-hook auto dial,
entry dial, click-to-dial
- Acoustic echo cancellation, voice mail with indicator, downloadable
ring tone (pending)
- Silence Suppression, VAD (Voice Activity Detection), CNG (Comfort
Noise Generation), Line Echo Cancellation (G.168) and AGC (Automatic
Gain Control)
- DIGEST authentication and encryption using MD5 and MD5-sess
- Provide easy configuration thru manual operation (attached analog
phone keypad and voice prompt, Web interface) or personalised automated
provisioning via central configuration file for mass deployment
- Layer 2 (802.1Q VLAN, 802.1p) and Layer 3 QoS (ToS, DiffServ, MPLS)
- NAT-friendly remote software upgrade capability (via tftp) even from
behind firewalls/NATs
Please select the appropriate PSU from the options in BUY menu.
Posted on Wednesday 18 January, 2006
Clumsy, does not connect properly, you have to ocassionally re-boot/switch off the unit.
But once connected the sound is clear
Incoming 'caller need..
Posted on Wednesday 13 April, 2005
Ineedbroadband find the adaptors are very easy to install and proud to be associated voiptalk. Top product!!..
Posted on Friday 11 March, 2005
Great product. Plugged into my wireless adsl modem/switch as a regular wired device. even though i'm all NAT, the thing worked a dream. no config prob..
Posted on Friday 11 February, 2005
This adaptor is good as a single phone on a broadband connected network. The setup is is fairly lengthy and best done using a browser across the lan. ..
Posted on Thursday 10 February, 2005
Easy to configure, works well. Lots of documentation available on the Web if you are interested in the details about this adaptor... Displaying 1 to 5 (of 12 reviews)
Result Pages: 1

Available Options: |
| Power Supply Unit: |
|
| RJ11 Adaptor: |
|
| Twin Pack: |
|
| VoIPtalk Bundle: |
|

|