The HandyTone 488 is an “All-In-1” Analgoue VoIP Adaptor based on SIP standard. It features superb sound quality, rich functions, a high degree of integration, ease of use, compact size and all at a great price.

The new Handytone-488 features 1 FXO gateway and 1 FXS port.

Not sure which Handytone?
Check our Grandstream Handytone comparison table.

Please select the appropriate PSU from the option list under BUY tab.

• The ATA488 does not currently support presentation of caller ID for incoming calls via the PSTN port.
• 1 FXS Port (for Analogue Phones) and 1 FXO gateway (for analogue line)
• SIP 2.0, TCP/UDP/IP, RTP/RTCP, HTTP, ARP/RARP, ICMP, DNS, DHCP, NTP, TFTP protocols
• PSTN port for connection to your analogue line - automatic switchover to landline in the event of an Internet failure
• Built-in router, NAT and gateway - ideal for cable modem users
• NAT traversal using IETF STUN and symmetric RTP (compatible with Cisco's ATA-186)
• Advanced Digital Signal Processing (DSP) to ensure superb hi-fidelity audio quality
• One LAN port & one WAN port for any analog telephones, cordless phones and fax machines
• Interoperable with various 3rd party SIP and user devices, Proxy/Registrar/Server, and gateway products
• Advanced and patent pending adaptive jitter buffer control, packet delay and loss concealment technology
• Popular codecs including G.723.1 (5.3k/6.3k), G.729A/B, G.711 (a-law and u-law), G.726 and G.728. Dynamic negotiation of codec and voice payload length
• Standard voice features such as Caller ID Display or Block, FLASH, in-band and out-of-band DTMF (RFC2833), Dial Plans, off-hook auto dial, entry dial, click-to-dial
• Acoustic echo cancellation, voice mail with indicator, downloadable ring tone (pending)
• Silence Suppression, VAD (Voice Activity Detection), CNG (Comfort Noise Generation), Line Echo Cancellation (G.168) and AGC (Automatic Gain Control)
• DIGEST authentication and encryption using MD5 and MD5-sess
• Provide easy configuration thru manual operation (attached analog phone keypad and voice prompt, Web interface) or personalised automated provisioning via central configuration file for mass deployment
• Layer 2 (802.1Q VLAN, 802.1p) and Layer 3 QoS (ToS, DiffServ, MPLS)
• NAT-friendly remote software upgrade capability (via tftp) even from behind firewalls/NATs

Does your telephone connector look like this?

Get a BT-to-RJ11 adaptor from menu in BUY sections.

Need more support? Click on the links below:

VoIPtalk Instant Setup

VoIPtalk Setup Instructions

User Manual / FAQs

Recommended Firmware

More Information

Do you want to find out more about VoIP in general? Check out our VoIP FAQ

VoIPtalk ships products to any destination worldwide. View our Shipping & Returns policy for more information.

Are you interested in becoming a reseller of our products? Contact us now for more information.