
Please wait while loading content...
UK and European Power Supplies Available
Grandstream HandyTone ATA-286 is an award-winning next generation VoIP
analog telephone adaptor based on industry open standards. Bult upon innovative
technology, Grandstream HandyTone ATA-286 features market leading superb
sound quality, compact size and rich functionalities at a highly-affordable
price.
Not sure which Handytone?
Check our Grandstream Handytone comparison table.
- SIP 2.0, TCP/UDP/IP, RTP/RTCP, HTTP, ARP/RARP, ICMP, DNS, DHCP, NTP, TFTP protocols
- NAT traversal using IETF STUN and symmetric RTP (compatible with Cisco's ATA-186)
- Advanced Digital Signal Processing (DSP) to ensure superb hi-fidelity audio quality
- One LAN port and one FXS interface for connection of analog / cordless telephones, and fax machines
- Transparent Fax pass-through
- Interoperable with various 3rd party SIP and user devices, Proxy/Registrar/Server, and gateway products
- Advanced and patent pending adaptive jitter buffer control, packet delay and loss concealment technology
- Popular codecs including G.723.1 (5.3k/6.3k), G.729A/B, G.711 (a-law and u-law), G.726 and G.728. Dynamic negotiation of codec and voice payload length
- Standard voice features such as Caller ID Display or Block, FLASH, in-band and out-of-band DTMF (RFC2833), Dial Plans, off-hook auto dial, entry dial, click-to-dial
- Acoustic echo cancellation, voice mail with indicator, downloadable ring tone (pending)
- Silence Suppression, VAD (Voice Activity Detection), CNG (Comfort Noise Generation), Line Echo Cancellation (G.168) and AGC (Automatic Gain Control)
- DIGEST authentication and encryption using MD5 and MD5-sess
- Provide easy configuration thru manual operation (attached analog phone keypad and voice prompt, Web interface) or personalised automated provisioning via central configuration file for mass deployment
- Layer 2 (802.1Q VLAN, 802.1p) and Layer 3 QoS (ToS, DiffServ, MPLS)
- NAT-friendly remote software upgrade capability (via tftp) even from behind firewalls/NATs
Please select the appropriate PSU from the options below.
Please note that all clearance products are under a 3-month warranty.
Rating:

Clumsy, does not connect properly, you have to ocassionally re-boot/switch off the unit.
But once connected the sound is clear
Incoming 'caller need..
Rating:

Ineedbroadband find the adaptors are very easy to install and proud to be associated voiptalk. Top product!!..
Rating:

Great product. Plugged into my wireless adsl modem/switch as a regular wired device. even though i'm all NAT, the thing worked a dream. no config prob..
Rating:

This adaptor is good as a single phone on a broadband connected network. The setup is is fairly lengthy and best done using a browser across the lan. ..
Rating:

Easy to configure, works well. Lots of documentation available on the Web if you are interested in the details about this adaptor...
Displaying 1 to 5 (of 12 reviews)
Result Pages: 1

Does your telephone connector look like this?
Get a BT-to-RJ11 adaptor from menu in BUY sections.
Need more support? Click on the links below:
VoIPtalk Instant Setup
VoIPtalk Setup Instructions
User Manual / FAQs
Recommended Firmware
More Information
Do you want to find out more about VoIP in general? Check out our VoIP FAQ
VoIPtalk ships products to any destination worldwide. View our Shipping & Returns policy for more information.
Are you interested in becoming a reseller of our products? Contact us now for more information.