Your cart is empty
You are here!
Click here to contact us now!

Camrivox Flexor 500 IP Phone Quick Setup

Back to voip setup guides directory

  1. Connect one end of the network cable to your data network port and connect the other end to the network (LAN) port on the phone.
  2. Power up the phone.
  3. Press the menu button. Press 5, this will show the phone's IP address as it is picked up from your DHCP server.
  4. Open a web browser on your PC and type the Phone's IP address into the address field (Make sure that your PC and Phone are on the same network).
  5. Set the account: click on account icon and after on manual settings.

    Camrivox Flexor 500 IP Phone Quick Setup

  6. Camrivox Flexor 500 IP Phone Quick Setup

  7. Complete the fields with the following data:
    SIP Registrar/Proxy: voiptalk.org
    SIP Registrar/Proxy: 5060
    SIP Outbound Proxy: nat.voiptalk.org
    SIP Outbound Proxy: 5065

    Camrivox Flexor 500 IP Phone Quick Setup

  8. Username and password:

    User name: your voiptalk voip ID
    Password: your voiptalk voip account password
    (To retrieve your VoIPtalk password go to your account page and click on your VoIPtalk ID.)

    Camrivox Flexor 500 IP Phone Quick Setup

  9. Set DTMF tone. Click on voice settings on the bottom of the menu page.

    Camrivox Flexor 500 IP Phone Quick Setup

  10. Check on voice settings the value below. Set DTMF mode to RFC2833(RTP).

    Camrivox Flexor 500 IP Phone Quick Setup



Back to top of this page Back to voip setup guides directory
Copyright © 2003 - 2020 | All rights reserved. VoIPtalk is a trading name of Telappliant Ltd Co. Registered number: 04632756