Pirelli Dualphone DLP-10 VoIP Setup Guide
- Press Menu button and Select WLAN.
- Scroll down and select WLAN settings and select Active settings.
- Select one of the profiles from the list like Perfil 4 and press select button. You will see the Activated message on the phone. Press Back button.
- Select Edit act. Settings
- Select SSID & Security option
- Select SSID and select site survey, you will see a message Searching followed by the list of SSID's available in your WiFi ar ea.
- Select your preferred SSID and press Save. You will see a message Saved on phone's screen. Press Back and press back again to SSID and Security menu.
- Select Security option and Select the security option of your access point. eg WEP (For exact details, contact your network administrator)
- Select the WEP key 1 an d select the WEP key settings. eg. 64 bit. (For exact details, contact your network administrator)
- Enter the WEP key (in ASCII for 64 bit key, there will be 10 characters) and press save and press back button six times to go to WLAN menu.
- If all the WLAN settings entered correctly, phone should have picked an IP address from DHCP server. Select WLAN status and scroll do wn to the Phone IP and make sure that phone picked the right IP address from DHCP server. If not please contact your network administrator.
- If IP address is OK, press back and select SIP settings.
- Select Username and enter your voiptalk user ID eg 844xxxxx and press save.
- Select Password and enter your sip password. Use # key to change from Numeric to alphabets and upper and lower case. Press save to save the password,
- Select Au th. Name and enter your voiptalk user ID eg 844xxxxx and press save.
- Select Domain name and enter voiptalk.o rg as domain name and press save. Use key 1 to enter.
- Select the local port and make sure it is 5060 and pre ss save.
- Select outbound server and enter nat.voiptalk.org as outbound server and press save.
- Select Outbound port and enter 5065 and press save.