Your cart is empty
You are here!
Click here to contact us now!

FritzBox Fon ATA Setup

Back to voip setup guides directory

  1. Plug the ADSL cable into DSL port of the router.
  2. Connect your PC to the LAN port of the router using a network cable. Your PC network settings should be configured to Obtain an IP automatically mode.
  3. Plug an analogue phone into FON 1 port.
  4. Connect the power supply into the power port of the router and plug the other side into the power outlet, and power up the router.
  5. Once the unit has booted up, access the web based configuration by entering the following IP address into the PC web browser: http://192.168.178.1. This will present the Fritz box overview page.

    FritzBox Fon ATA Setup

  6. To configure basic ADSL and VoIP configuration, click on Configuration Wizard. This will present you the Wizard welcome page. Press Next.

    FritzBox Fon ATA Setup

  7. Select your internet connection mode on the Internet connection page. The default value is Router PPP which is required if the ISP is assigning the network address and other information. If the ISP provides a Static IP address then Click on RFC1483/2684. The default value (Router PPP) is used in most cases.

    FritzBox Fon ATA Setup

  8. Enter your ADSL authentication details.

    FritzBox Fon ATA Setup

  9. Select the Flat rate on the next page to keep the internet connected all the time.

    FritzBox Fon ATA Setup

  10. Click on Next on Check Internet Connection page. The router will test the connection and if it is connected it will show as follows:

    FritzBox Fon ATA Setup

  11. Press Next to configure VoIP port and press Setup new Internet number.

    FritzBox Fon ATA Setup

  12. Enter your VoIPtalk account details as follows and press Next.

    FritzBox Fon ATA Setup

  13. The router will check the voip configuration and if it is properly configured it will display the following:

    FritzBox Fon ATA Setup

  14. Press Next and press Exit configuration wizard. This will take you to the Overview page.
  15. Dial 902 from the phone connected to FON 1 port to confirm VoIP connectivity.


Back to top of this page Back to voip setup guides directory
Copyright © 2003 - 2014 | All rights reserved. VoIPtalk is a trading name of Telappliant Ltd Co. Registered number: 04632756