Click here to contact us now! Click here to contact us now!

Polycom 550 Setup

Back to voip setup guides directory

  1. Power up the phone.
  2. The IP address will be picked from the DHCP server on your network and will be displayed on the LCD.
  3. Open a web browser on your PC and type the SoundStations's IP address in the address field (make sure that your PC and SoundStation are on the same network).
  4. This will present you with the configuration web page for the IP550.
  5. Click on the SIP link. This will ask for your username and password.

    The Default Admin Username is Polycom and the Default Admin Password is 456.
  6. Enter the Outbound Proxy and Server 1 values as follows:

    Polycom 550 Setup

  7. Press the Submit button and it will save the settings and reboot the unit.
  8. When the phone has rebooted, click on Line link and enter the values in Identification section as follows:

    Polycom 550 Setup

  9. Press the Submit button and it will save the settings and reboot the unit.
  10. On rebooting, your phone should have connected to the VoIPtalk service. To test this dial 902. You should hear a confirmation message played back to you.



Note: If you are finding any issues with the Polycom IP550 SoundStation configuration with VoIPtalk, please contact our Support Team.


Back to top of this page Back to voip setup guides directory