Your cart is empty
You are here!
Click here to contact us now!

Siemens C475IP Setup

Back to voip setup guides directory
Note: Siemens Gigaset handset is registered with the base unit by default.

To register it again or if you are registering an additional headset with the base station, please follow the instructions on page 31 of the User Manual. To configure the Siemen Gigaset C475IP please follow these instructions.


  1. Connect the base station's network port (on the side of the unit) to a network switch or into an ethernet port of your router.
  2. Connect your handset phone line to the base station's phone port (located on the reverse side of the base station).
  3. Power up the base station.

    Siemens C475IP Setup

  4. The base unit will pick up an IP Address from your router's DHCP server by default. To retrieve the IP address, pick up the handset and press the menu key. Scroll down to settings and press OK then scroll down to Base and press OK. Scroll down to Local Network and press OK. You will be prompted for the system PIN which is set to 0000 by default. Enter the PIN, press OK and scroll down to the IP address option and press OK. The IP address will show up on the screen of the handset.
  5. Open a web browser on a PC connected on the same network and enter the IP address you retrieved in Step 4. You will see the login screen with a Welcome message. Enter the base PIN (0000) and click on the OK button.

    Siemens C475IP Setup

  6. Select the Settings tab from the top of the screen and select the Telephony link from the left side of the screen. Select the connection link. You will see your connection details. Uncheck the Active option under the Gigaset.net heading and click on the Edit button under IP Connection heading to bring up the SIP settings.

    Siemens C475IP Setup

  7. Click on Select VoIP Provider.

    Siemens C475IP Setup

  8. Choose country of your VoIP provider: Great Britain . Choose your VoIP provider: VoIPtalk.

    Siemens C475IP Setup

  9. Insert your voiptalk id and password where you see "voiptalk-id" in the picture below:
    Authentication Name: 84XXXXXX
    Authentication password: password (To retrieve your password go to your account page and click on your VoIPtalk ID).
    Username: 84XXXXXX
    Display name: 84XXXXXX
    
    Click on Set to save the configuration.

    Siemens C475IP Setup

  10. You will be redirected to the status page. If all the details were entered correctly and your Internet connection is working the IP Connection Status should indicate registered.

    Siemens C475IP Setup

  11. Click on Advance Setting link and select on DTMF over VoIP connections the option RFC2833
  12. To avoid low audio quality select like preferite codec G729. Click on Audio tab and put the G729 coden on the top of the list.

    Siemens C475IP Setup

  13. To confirm your settings, dial 902 from your handset. You should hear a congratulatory message thanking you for your hard work!


Back to top of this page Back to voip setup guides directory
Copyright © 2003 - 2020 | All rights reserved. VoIPtalk is a trading name of Telappliant Ltd Co. Registered number: 04632756