Your cart is empty
You are here!
Click here to contact us now!

Standard SIP Phone Setup

Back to voip setup guides directory

  1. Make sure that your SIP Phone is turned on and connected to an IP Router or Modem. If you are using a softphone make sure that your PC is connected to the network.
  2. In your phone's configuration menu there should be an option to define a SIP Server, SIP Registrar or SIP Domain value. Set the value to: voiptalk.org.
  3. For SIP Authentication, set your SIP User ID or similar to your VoIPtalk ID (eg 84411076) and set SIP Password or similar to your six-digit VoIPtalk Password provided in your activation email.
  4. If you have an Outbound Proxy setting, set this to: nat.voiptalk.org:5065. Alternatively, if this setting allows you to define the port in a separate field, set the IP Address to: nat.voiptalk.org and the port number to: 5065.
  5. Confirm the settings by reloading or rebooting your phone. Dial 902 to confirm your configuration.
  6. If you encounter any problems, make sure that your IP Router or ISP is not blocking any traffic, specifically on ports 5060 and 5065. Also ensure that the router is not blocking UDP traffic. You can contact your network administrator or ISP for more information.
  7. For additional assistance please refer to our instructions for other VoIP phones. You can also contact our support team via email. Please state your phone model, VoIPtalk ID and provide screenshots if possible in order to resolve any issues you may have as effectively as possible.


Back to top of this page Back to voip setup guides directory
Copyright © 2003 - 2020 | All rights reserved. VoIPtalk is a trading name of Telappliant Ltd Co. Registered number: 04632756