Your cart is empty
You are here!
Click here to contact us now!

SNOM M3 IP DECT Phone Setup

Back to voip setup guides directory
The Snom m3 works with VoipTalk only with the firmware version 1.11 or major. To update the firmware please perform the following step:
Press the central button on the hadset
1) Choose setting on the menu
2) Select System settings
3) Enter the code “0000”
4) Select firmware update
5) Choose the last , it should be version 0111 or major.
6) Don't uplug the power until the end of the upgrade process.



  1. To prepare the gateway connect the Ethernet cable to the NET port on the base and then to a LAN port on your network. Place the handset in the charger, and charge the battery. When you place the handset in the charger, the handset automatically registers with the gateway.
  2. Open a browser on your PC, go to the IP address of the gateway (Press the volume up key to get the IP address).
  3. Log in to the menu. default settings: username: admin password: admin
  4. In the menu, choose Identity 1. Fill in the SIP user data:
    Server is local: No
    Display name: VoIPtalk id
    Account: VoIPtalk id
    Password: password (To retrieve your password go to your account page and click on your VoIPtalk ID).
    Account Name: Identity 1
    Registrar: voiptalk.org
    Outbound Proxy: nat.voiptalk.org
    Server Port: 5060
    Outbound Proxy Port: 5065 
    Click on button Save and Reboot the device

    SNOM M3 IP DECT Phone Setup

  5. After the reboot on the home page you should see the account ready.

    SNOM M3 IP DECT Phone Setup




For more information and firmware update go to http://wiki.snom.com/wiki/index.php/Main_Page


Back to top of this page Back to voip setup guides directory
Copyright © 2003 - 2020 | All rights reserved. VoIPtalk is a trading name of Telappliant Ltd Co. Registered number: 04632756