The Snom m3 works with VoipTalk only with the firmware version 1.11 or major. To update the firmware please perform the following step:
Press the central button on the hadset
1) Choose setting on the menu
2) Select System settings
3) Enter the code “0000”
4) Select firmware update
5) Choose the last , it should be version 0111 or major.
6) Don't uplug the power until the end of the upgrade process.

1. To prepare the gateway connect the Ethernet cable to the NET port on the base and then to a LAN port on your network. Place the handset in the charger, and charge the battery. When you place the handset in the charger, the handset automatically registers with the gateway.

For more information and firmware update go to http://wiki.snom.com/wiki/index.php/Main_Page

2. Open a browser on your PC, go to the IP address of the gateway (Press the volume up key to get the IP address).

For more information and firmware update go to http://wiki.snom.com/wiki/index.php/Main_Page

3. Log in to the menu. default settings: username: admin password: admin

For more information and firmware update go to http://wiki.snom.com/wiki/index.php/Main_Page

4. In the menu, choose Identity 1. Fill in the SIP user data:

   Server is local: No
   Display name: VoIPtalk id
   Account: VoIPtalk id
   Password: password (To retrieve your password go to your account page and click on your VoIPtalk ID).
   Account Name: Identity 1
   Registrar: voiptalk.org
   Outbound Proxy: nat.voiptalk.org
   Server Port: 5060
   Outbound Proxy Port: 5065 

   Click on button Save and Reboot the device


For more information and firmware update go to http://wiki.snom.com/wiki/index.php/Main_Page

5. After the reboot on the home page you should see the account ready.


For more information and firmware update go to http://wiki.snom.com/wiki/index.php/Main_Page