Trix Box - VoIPtalk SIP Trunk Setup Guide

1. Outgoing calls:
   
   Go to asterisk -> FreePBX, then click Setup, and click Trunks. Click add SIP trunks, and in General Settings enter your PSTN incoming number received from voiptalk.org in Outbound Caller ID field.
2. Check the Never Override CallerID check box, and set Maximum Channels to 20 or any limit you require (There may be channel limit on your voiptalk account depending on your voiptalk account tariff)

   

3. Leave Outbound Dial Prefix and the Outgoing dialing rule field blank.
   
   In Outgoing settings set trunk name to VoIPtalk_SIP, and PEER details as

   host=voiptalk.org
   insecure=very
   secret=your voiptalk SIP account password
   type=peer
   username=your voiptalk account

   

4. Leave Incoming Setting fields blank, and press Submit changes then select the red bar at the top of the screen to reload the Configuration files.
5. Outbound Dialing Route:
   
   Set the VoIPtalk_SIP as a dialing out trunk, click on Outbound Routes and select the default 0 9_outside route. Then select SIP/VoIPtalk_SIP in the Trunk Sequence drop down list 0.
   
   Press Add, and Press Submit button to save the changes. Then select the red bar at the top of the screen to reload the Configuration files.
   
   Note. By default this outbound rule is using prefix 9. You can change this in Dial Patterns as per your requirements.
   
   You should be able to dial out on VoIPtalk trunk.
6. Incoming calls:
   
   Go to asterisk -> FreePBX and click Setup, then Trunks. Select your VoIPtalk trunk you created for out going calls. Scroll down to the pages and in Registration section insert on Register string your voiptalk SIP userid and password.

   

7. Press Submit changes and select the red bar at the top of the screen to reload the Configuration files. On left hands side menu click on General Settings and select [color=green]yes[b][/green] in [b]Allow Anonymous Inbound SIP Calls.

   

8. Press Submit changes and select the red bar at the top of the screen to reload the Configuration files.
9. Set inbound dialing route:
   
   On left hands side menu click on Inbound Routes and set your PSTN number as DID number, leave the caller id and the Zap channel field blank.

   

10. Select option Signal RINGING and leave Alert info field as blank. In Set Destination select from the menu of Core the extensions of you phone. Press Submit changes and select the red bar at the top of the screen to reload the Configuration files.

    



11. Set your Dialling plan for your VoIPtalk incoming number:
    
    You need to set the routes for your incoming numbers on voiptalk.org to get incoming calls working. To do this go to [url]www.voiptalk.org[url] and click on my account tab page. Enter your email address and your voiptalk user password. (This is not the SIP account password). Then you will see the list of your voiptalk IDs and associated incoming numbers, click on the incoming number you want to use with VoIPtalk-SIP trunk on your trix box. This will present you the manage incoming number. Select the Select a Configuration Option to Route to VoIPoffice, and click the route to VoIPoffice PBX button.

    



12. Dial your incoming number and this should ring the selected extension on Trixbox.