Click here to contact us now! Click here to contact us now!

Browse hardware by category:

ITSPA Quality Mark



Wildcard TE405P 4-Port ISDN PRI Card

Digium
Digium
Wildcard TE405P 4-Port ISDN PRI Card DIGTE405P
Wildcard TE405P 4-Port ISDN PRI Card
£
was: £850.00
£453.75
£544.50 inc. VAT
850.00 New In stock Suited for: ISDN Primary (8 - 120 Channels) With a TE405P you can connect a channel bank to one of the ports, providing you with up to 120 analogue ports! The TE405P is the next generation of Digium hardware that improves performance and scalability through bus mastering architecture. The TE405P supports both E1, T1, J1 environments and is selectable on a per-card or per-port basis. This feature enables signaling translation between E1, T1, and J1 equipment and allows inexpensive T1 channel banks to connect with E1 circuits. Because the TE405P improves I/O speed by up to 10 times, the result is reduced CPU usage and increased card density per server. Digium has designed the TE405P to be fully compatible with existing software applications and it is fully integrated with the Asterisk Open Source PBX/IVR platform. Also, the open source driver supports an API interface for custom application development. With the combination of Digium Hardware and Asterisk software, numerous combinations of telephony configurations are possible. From the traditional PBX to VoIP Gateways, Digium solutions are paving the way for a new generation of worldwide communications. The TE405P supports industry standard telephony and data protocols, including Primary Rate ISDN (both N. American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and trunk-side interfaces are supported, also included are advanced call features. The TE405P is for use only with a 5.0 volt PCI slot. The TE410P is for use only with a 3.3 volt PCI slot - typically available on newer motherboards and in 64-bit PCI bus architectures.
Your purchase is worth: 22 VoIP points
Click here to become a VoIP Reseller
Overview
Features
Reviews
Support and downloads
Please wait while loading content...

Wildcard TE405P 4-Port ISDN PRI CardSuited for: ISDN Primary (8 - 120 Channels)

With a TE405P you can connect a channel bank to one of the ports, providing you with up to 120 analogue ports!

The TE405P is the next generation of Digium hardware that improves performance and scalability through bus mastering architecture. The TE405P supports both E1, T1, J1 environments and is selectable on a per-card or per-port basis. This feature enables signaling translation between E1, T1, and J1 equipment and allows inexpensive T1 channel banks to connect with E1 circuits. Because the TE405P improves I/O speed by up to 10 times, the result is reduced CPU usage and increased card density per server.

Digium has designed the TE405P to be fully compatible with existing software applications and it is fully integrated with the Asterisk Open Source PBX/IVR platform. Also, the open source driver supports an API interface for custom application development. With the combination of Digium Hardware and Asterisk software, numerous combinations of telephony configurations are possible. From the traditional PBX to VoIP Gateways, Digium solutions are paving the way for a new generation of worldwide communications.

The TE405P supports industry standard telephony and data protocols, including Primary Rate ISDN (both N. American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and trunk-side interfaces are supported, also included are advanced call features.

The TE405P is for use only with a 5.0 volt PCI slot. The TE410P is for use only with a 3.3 volt PCI slot - typically available on newer motherboards and in 64-bit PCI bus architectures.

Data Modes:
- Cisco HDLC
- HDLC
- PPP
- Multilink PPP
- Frame Relay

Voice Modes
PRI CPE & PRI NET - NI1 / NI2 / EuroISDN / 4ESS (AT&T) / 5ESS (Lucent) / DMS100
E&M - Wink / Feature Group B / Feature Group D
FXO & FXS - Ground Start / Loop Start / Loop Start with Disconnect Detect

Certifications
Telecom FCC Part 68 (TIA-968-A), IC CS-03, TBR 4, TBR 12, TBR 13, AS/ACIF S038, AS/ACIF S016
Safety UL/CSA 60950, IEC 60950, EN60950, AS/NZS 60950
Note: Finland, Norway and Sweden require that equipment using this product must be located in a Restricted Access Location (RAL).
Emissions EN55022 Class B Radiated & Conducted
Immunity EN55024 ITE, EN61000


Be the first to write a review.



Write Review on Wildcard TE405P 4-Port ISDN PRI Card

Technical Data

Data Sheet (PDF)
Quick Install Guide for Asterisk™ & Zaptel (PDF)
Zaptel Configuration (PDF)
Zaptel PPP Guide
Zaptel HDLC Guide
Basic Configuration and Examples

If you have an ISDN connection from NTL then please ensure you request the ISDN 110 service as the TE110P will not work the NTL standard ISDN connection (ISDN 85).

More Information

Do you want to find out more about VoIP in general? Check out our VoIP FAQ

VoIPtalk ships products to any destination worldwide. View our Shipping & Returns policy for more information.

Are you interested in becoming a reseller of our products? Contact us now for more information.



Click here to start Live Chat!
Wildcard TE407P 4-Port ISDN PRI Card Click here to select a product from the list Wildcard TE407P 4-Port ISDN PRI Card
New Hardware
 Yealink SIP-T44W IP Phone Yealink SIP-T44W IP Phone
 Gigaset N610IP Pro DECT Base Station Gigaset N610IP Pro DECT Base...
 Yealink CP925 IP Conference Phone Yealink CP925 IP Conference...
 Yealink W76P IP DECT Phone Yealink W76P IP DECT Phone
 Gigaset SL800H PRO DECT Handset Gigaset SL800H PRO DECT Handset
 Gigaset R700H PRO DECT Handset Gigaset R700H PRO DECT Handset

easySPEAK Softphone


Download the easySPEAK Softphone

Fully functional free trial version


Find out moreeasySPEAK VoIP Softphone